Meshtastic App/com.geeksville.mesh/[androidJvm]ConfigProtos/Config/PositionConfig/Builder

Builder

class Builder : GeneratedMessage.Builder<BuilderT> , ConfigProtos.Config.PositionConfigOrBuilder


Position Config

Protobuf type meshtastic.Config.PositionConfig

Functions

build

open fun build(): ConfigProtos.Config.PositionConfig

buildPartial

open fun buildPartial(): ConfigProtos.Config.PositionConfig

clear

open fun clear(): ConfigProtos.Config.PositionConfig.Builder

clearBroadcastSmartMinimumDistance

open fun clearBroadcastSmartMinimumDistance(): ConfigProtos.Config.PositionConfig.Builder


The minimum distance in meters traveled (since the last send) before we can send a position to the mesh if position_broadcast_smart_enabled

uint32 broadcast_smart_minimum_distance = 10;

clearBroadcastSmartMinimumIntervalSecs

open fun clearBroadcastSmartMinimumIntervalSecs(): ConfigProtos.Config.PositionConfig.Builder


The minimum number of seconds (since the last send) before we can send a position to the mesh if position_broadcast_smart_enabled

uint32 broadcast_smart_minimum_interval_secs = 11;

clearFixedPosition

open fun clearFixedPosition(): ConfigProtos.Config.PositionConfig.Builder


If set, this node is at a fixed position.
We will generate GPS position updates at the regular interval, but use whatever the last lat/lon/alt we have for the node.
The lat/lon/alt can be set by an internal GPS or with the help of the app.

bool fixed_position = 3;

clearGpsAttemptTime

open fun ~~clearGpsAttemptTime~~(): ConfigProtos.Config.PositionConfig.Builder


Deprecated in favor of using smart / regular broadcast intervals as implicit attempt time

uint32 gps_attempt_time = 6 [deprecated = true];

clearGpsEnabled

open fun ~~clearGpsEnabled~~(): ConfigProtos.Config.PositionConfig.Builder


Is GPS enabled for this node?

bool gps_enabled = 4 [deprecated = true];

clearGpsEnGpio

open fun clearGpsEnGpio(): ConfigProtos.Config.PositionConfig.Builder


(Re)define PIN_GPS_EN for your board.

uint32 gps_en_gpio = 12;

clearGpsMode

open fun clearGpsMode(): ConfigProtos.Config.PositionConfig.Builder


Set where GPS is enabled, disabled, or not present

.meshtastic.Config.PositionConfig.GpsMode gps_mode = 13;

clearGpsUpdateInterval

open fun clearGpsUpdateInterval(): ConfigProtos.Config.PositionConfig.Builder


How often should we try to get GPS position (in seconds)
or zero for the default of once every 30 seconds
or a very large value (maxint) to update only once at boot.

uint32 gps_update_interval = 5;

clearPositionBroadcastSecs

open fun clearPositionBroadcastSecs(): ConfigProtos.Config.PositionConfig.Builder


We should send our position this often (but only if it has changed significantly)
Defaults to 15 minutes

uint32 position_broadcast_secs = 1;

clearPositionBroadcastSmartEnabled

open fun clearPositionBroadcastSmartEnabled(): ConfigProtos.Config.PositionConfig.Builder


Adaptive position braoadcast, which is now the default.

bool position_broadcast_smart_enabled = 2;

clearPositionFlags

open fun clearPositionFlags(): ConfigProtos.Config.PositionConfig.Builder


Bit field of boolean configuration options for POSITION messages
(bitwise OR of PositionFlags)

uint32 position_flags = 7;

clearRxGpio

open fun clearRxGpio(): ConfigProtos.Config.PositionConfig.Builder


(Re)define GPS_RX_PIN for your board.

uint32 rx_gpio = 8;

clearTxGpio

open fun clearTxGpio(): ConfigProtos.Config.PositionConfig.Builder


(Re)define GPS_TX_PIN for your board.

uint32 tx_gpio = 9;

getBroadcastSmartMinimumDistance

open fun getBroadcastSmartMinimumDistance(): Int


The minimum distance in meters traveled (since the last send) before we can send a position to the mesh if position_broadcast_smart_enabled

uint32 broadcast_smart_minimum_distance = 10;

getBroadcastSmartMinimumIntervalSecs

open fun getBroadcastSmartMinimumIntervalSecs(): Int


The minimum number of seconds (since the last send) before we can send a position to the mesh if position_broadcast_smart_enabled

uint32 broadcast_smart_minimum_interval_secs = 11;

getDefaultInstanceForType

open fun getDefaultInstanceForType(): ConfigProtos.Config.PositionConfig

getDescriptor

fun getDescriptor(): Descriptors.Descriptor

getDescriptorForType

open fun getDescriptorForType(): Descriptors.Descriptor

getFixedPosition

open fun getFixedPosition(): Boolean


If set, this node is at a fixed position.
We will generate GPS position updates at the regular interval, but use whatever the last lat/lon/alt we have for the node.
The lat/lon/alt can be set by an internal GPS or with the help of the app.

bool fixed_position = 3;

getGpsAttemptTime

open fun ~~getGpsAttemptTime~~(): Int


Deprecated in favor of using smart / regular broadcast intervals as implicit attempt time

uint32 gps_attempt_time = 6 [deprecated = true];

getGpsEnabled

open fun ~~getGpsEnabled~~(): Boolean


Is GPS enabled for this node?

bool gps_enabled = 4 [deprecated = true];

getGpsEnGpio

open fun getGpsEnGpio(): Int


(Re)define PIN_GPS_EN for your board.

uint32 gps_en_gpio = 12;

getGpsMode

open fun getGpsMode(): ConfigProtos.Config.PositionConfig.GpsMode


Set where GPS is enabled, disabled, or not present

.meshtastic.Config.PositionConfig.GpsMode gps_mode = 13;

getGpsModeValue

open fun getGpsModeValue(): Int


Set where GPS is enabled, disabled, or not present

.meshtastic.Config.PositionConfig.GpsMode gps_mode = 13;

getGpsUpdateInterval

open fun getGpsUpdateInterval(): Int


How often should we try to get GPS position (in seconds)
or zero for the default of once every 30 seconds
or a very large value (maxint) to update only once at boot.

uint32 gps_update_interval = 5;

getPositionBroadcastSecs

open fun getPositionBroadcastSecs(): Int


We should send our position this often (but only if it has changed significantly)
Defaults to 15 minutes

uint32 position_broadcast_secs = 1;

getPositionBroadcastSmartEnabled

open fun getPositionBroadcastSmartEnabled(): Boolean


Adaptive position braoadcast, which is now the default.

bool position_broadcast_smart_enabled = 2;

getPositionFlags

open fun getPositionFlags(): Int


Bit field of boolean configuration options for POSITION messages
(bitwise OR of PositionFlags)

uint32 position_flags = 7;

getRxGpio

open fun getRxGpio(): Int


(Re)define GPS_RX_PIN for your board.

uint32 rx_gpio = 8;

getTxGpio

open fun getTxGpio(): Int


(Re)define GPS_TX_PIN for your board.

uint32 tx_gpio = 9;

isInitialized

fun isInitialized(): Boolean

mergeFrom

open fun mergeFrom(other: ConfigProtos.Config.PositionConfig): ConfigProtos.Config.PositionConfig.Builder

open fun mergeFrom(other: Message): ConfigProtos.Config.PositionConfig.Builder

open fun mergeFrom(input: CodedInputStream, extensionRegistry: ExtensionRegistryLite): ConfigProtos.Config.PositionConfig.Builder

setBroadcastSmartMinimumDistance

open fun setBroadcastSmartMinimumDistance(value: Int): ConfigProtos.Config.PositionConfig.Builder


The minimum distance in meters traveled (since the last send) before we can send a position to the mesh if position_broadcast_smart_enabled

uint32 broadcast_smart_minimum_distance = 10;

setBroadcastSmartMinimumIntervalSecs

open fun setBroadcastSmartMinimumIntervalSecs(value: Int): ConfigProtos.Config.PositionConfig.Builder


The minimum number of seconds (since the last send) before we can send a position to the mesh if position_broadcast_smart_enabled

uint32 broadcast_smart_minimum_interval_secs = 11;

setFixedPosition

open fun setFixedPosition(value: Boolean): ConfigProtos.Config.PositionConfig.Builder


If set, this node is at a fixed position.
We will generate GPS position updates at the regular interval, but use whatever the last lat/lon/alt we have for the node.
The lat/lon/alt can be set by an internal GPS or with the help of the app.

bool fixed_position = 3;

setGpsAttemptTime

open fun ~~setGpsAttemptTime~~(value: Int): ConfigProtos.Config.PositionConfig.Builder


Deprecated in favor of using smart / regular broadcast intervals as implicit attempt time

uint32 gps_attempt_time = 6 [deprecated = true];

setGpsEnabled

open fun ~~setGpsEnabled~~(value: Boolean): ConfigProtos.Config.PositionConfig.Builder


Is GPS enabled for this node?

bool gps_enabled = 4 [deprecated = true];

setGpsEnGpio

open fun setGpsEnGpio(value: Int): ConfigProtos.Config.PositionConfig.Builder


(Re)define PIN_GPS_EN for your board.

uint32 gps_en_gpio = 12;

setGpsMode

open fun setGpsMode(value: ConfigProtos.Config.PositionConfig.GpsMode): ConfigProtos.Config.PositionConfig.Builder


Set where GPS is enabled, disabled, or not present

.meshtastic.Config.PositionConfig.GpsMode gps_mode = 13;

setGpsModeValue

open fun setGpsModeValue(value: Int): ConfigProtos.Config.PositionConfig.Builder


Set where GPS is enabled, disabled, or not present

.meshtastic.Config.PositionConfig.GpsMode gps_mode = 13;

setGpsUpdateInterval

open fun setGpsUpdateInterval(value: Int): ConfigProtos.Config.PositionConfig.Builder


How often should we try to get GPS position (in seconds)
or zero for the default of once every 30 seconds
or a very large value (maxint) to update only once at boot.

uint32 gps_update_interval = 5;

setPositionBroadcastSecs

open fun setPositionBroadcastSecs(value: Int): ConfigProtos.Config.PositionConfig.Builder


We should send our position this often (but only if it has changed significantly)
Defaults to 15 minutes

uint32 position_broadcast_secs = 1;

setPositionBroadcastSmartEnabled

open fun setPositionBroadcastSmartEnabled(value: Boolean): ConfigProtos.Config.PositionConfig.Builder


Adaptive position braoadcast, which is now the default.

bool position_broadcast_smart_enabled = 2;

setPositionFlags

open fun setPositionFlags(value: Int): ConfigProtos.Config.PositionConfig.Builder


Bit field of boolean configuration options for POSITION messages
(bitwise OR of PositionFlags)

uint32 position_flags = 7;

setRxGpio

open fun setRxGpio(value: Int): ConfigProtos.Config.PositionConfig.Builder


(Re)define GPS_RX_PIN for your board.

uint32 rx_gpio = 8;

setTxGpio

open fun setTxGpio(value: Int): ConfigProtos.Config.PositionConfig.Builder


(Re)define GPS_TX_PIN for your board.

uint32 tx_gpio = 9;